In addition to your Ground Spike, you will need:
The first thing to do is to dig a hole. This needs to be the same depth as your Ground Spike and about a spade’s width wide.
Place the Ground Spike vertically into the hole with the spike pointing downwards.
Next, you need to fill the hole around the spike so that it is fixed firmly and permanently into position. To do this, pour in the Post Mix Concrete, whilst holding the spike in place with your other hand.
When the concrete has been added, use your spirit level to ensure that the Ground Spike is upright and vertical. This is really important.
When you’re satisfied that the spike is vertical, begin adding water and the Post Mix Concrete will start to set.
Post Mix Concrete sets very quickly, usually within just 5-10 minutes, so you need to keep checking that your Ground Spike is absolutely level during the drying time. Make adjustments if required.
When the concrete is dry, check that there are no raised edges.**
Finally, you’re ready to install your new Rotary Washing Line!
Please don’t hesitate to contact the Home Laundry Company if you require any further help or advice on installing your Rotary Washing Line. Call 01948 660335 or email email@example.com to talk to one of our team.
Our optional Ground Spike – a three-vial plastic spirit level with elastic band for attaching to your upright Rotary Washing Line pole (pole to be inserted into spike during setting of concrete) – is also available for only £10.
By attaching this to your lower pole, you can ensure a perfectly vertical (1mm/1m accuracy) rotary washing line installation. Read more about the ground spike installation aid
All our rotary washing lines come with a free ground spike worth £11.99
All our rotary washing clothes lines come with a free cover worth at least £8.49!
Need advice on which product is best for you and would rather speak to a human being? Call us on 01948 800 333
We are the worlds largest manufacturer of rotary washing lines with over 60% market share!
Our Customer Service Team